|
Specifications
|
| Table Tilting |
Type: Motor drive
Range: Approx. +90° ~ -15°
Speed: Approx. 90° / 20sec 60Hz |
| Table Sliding |
Type: Motor driven
Range: Approx. 80cm upward
Approx. 30cm downward (in horizontal position)
Approx. 80cm upward (in table tilting 50° -90°)
Speed: Approx. 3.6cm / sec 60Hz
Approx. 5cm / sec 50Hz |
| Tabletop |
Flat 200cm L X 70cm W |
| Tabletop Height |
Approx. 84cm H (in horizontal position) |
Tabletop to
focus distance |
Approx. 41cm H |
| Tabletop Material |
Laminate, approx. 0.6cm thickness |
| Inherent filtration |
Less than 1.0mm Al eq. at 100kVp |
Tabletop to
film distance |
Approx. 6.5cm |
| Bucky Device |
Type: Motor driven reciprocation
Grid: r=8:1, d=85 lines/inch
Cassette Size: Up to 14"X17"(35X43cm)
Travelrange: Approx. 105cm |
Movement of
spot-film device |
Longitudinal travel approx. 55cm
Transverse travel approx. ±12c
Vertical travel approx. 14~15cm |
| Compression Cone |
Manual operation |
| Grid |
r=8:1, d=85 lines / inch |
| Field Collimation |
motor driven, manual opertion |
| Parking of spot-film device |
Electromagnetic lock systems |
| Min. installation space |
310cm L X 158cm W X 260cm H |
| Weight |
Approx. 650kg (except image assembly) |
| Power Requirements |
220VAC, 30KVA, 50/60Hz, single phase |
|
Tube Support Units
|
|
Floor to Ceiling FGI-FCT-10
|
Power Supply: 12VDC, 15VAC, 50/60Hz
Top and Bottom change distance: Top 135cm Bottom 180cm
Fully counterbalanced heavy-duty tube support unit with maximum support capacity
The counterbalance assures smooth and safe vertical movement
The contol handle locking mechanism allows the system to be positioned easily, speedily, and reliably via electronic brakes
|
|
Ceiling Suspended FGI-HD-500-C
|
Power Supply: 12-24VDC, 100/200VAC, 50/60Hz
Structure: Ceiling sticking rail type
Top and Bottom change distance: Top 120cm Bottom 190cm
Highest quality electromagnetic locks operated from the control handle of the tube
Sturdy construction for maximum stability
Fully counterbalanced suspension unit for heavy duty payloads
Constructed to the highest standards of engineering design
|
|
Control Units
|
|
FGI-HD-750D
|
Rating:
600mA at 100kVp
500mA at 125kVp
4mA at 120kVp
600mA/150kVp console designed according to the compatibilty of economical design with high performance
Control panel contributes to simple and easy operating procedures
Stabilized x-ray tube current
Silicone is a high voltage rectifier for full wave output
X-ray generator designed to be easy to operate and for low cost of maintenance
|
|
FGI-HD-5125
FGI-HD-750AD
|
FGI-HD-5125 FGI-HD-750AD
Rating: Rating:
500mA at 100kVp 600mA at 100kVp
300mA at 125kVp 500mA at 125kVp
4mA at 120kVp 300mA at 150kVp
4mA at 120kVp
500mA/125kVp, 600mA/150kVp are single phase, full-wave rectification generators providing wide exposure latitudes for radiographic and fluoroscopic procedures
Control consoles designed to combine the advantages of economical design with high performance
Control panels contribute to simple and easy operating procedures
Silicone is a high voltage rectifier for full wave output
X-ray generator designed to be easy to operate and for low cost of maintenance
|
