| FGI Oximeter Specifications (Nominal) |
| Autocorr® Plus Pulse Oximeter/ECG Monitor w/ SAC |
 |
| FGI-3404 |
| Displays, Indicators & Keys: |
| Display |
Electroluminescent |
| Resolution |
160 X 80 pixels |
| Waveform |
ECG, Plethysmogram |
| Graphic Trends |
SpO2, Pulse Rate (Heart Rate), Pulse Signal Strength & Respiration |
| SpO2 |
3-digit LED numeric display |
| 0.56 inch (14.2mm) high |
| Pulse Rate |
3-digit LED numeric display |
| 0.43 inch (10.9mm) high |
| Pulse Strength |
Logarithmically scaled, 10-segment LED bar graph |
| Low Battery |
LOW BATTERY message when 10 minutes of battery life remain |
| Alarm Silence |
SILENCED BELL icon indicates temporary or Indefinite status
ALARM LED will flash, ASYSTOLE message on screen flashes |
| Sensor |
Message indicates SpO2 sensor problem; Message indicates SpO2 monitor is searching |
| Lost Pulse Alarm |
LED will flash "Lost Pulse" message on screen
Message indicates an ECG lead disconnect condition |
| Artifact |
Light indicates the presence of excess motion or other artifact |
| Power |
Green LED indicates external power and battery is charging |
| SpO2: |
| Range |
0-100% |
| Accuracy |
±2% at 70-100% |
| ±3% at 50-69% |
| Averaging |
4, 8, or 16 pulse beat average |
| Alarm Range |
High-50%-100% & OFF (1% steps) |
| Low-50%-100% & OFF (1% steps) |
| Pulse Rate: |
| Range |
30-254 bpm |
| Accuracy |
±2 bpm or ±2%, whichever is greater |
| Averaging |
8 or 16 second average |
| Alarm Range |
High: 30-254 & OFF (1 bpm steps) |
| Low: 30-254 & OFF (1 bpm steps) |
| Power Requirements: |
105-125 V~, 60Hz (Wall Mount) |
| 100 V~, 50Hz (optional) |
| 230 V~, 50/60Hz (Table Top) |
| Battery Life: |
Standard Lead-Acid battery: |
| -Internally rechargeable; not user replaceable |
| -Fully charges in 6 hours |
| -Approximately 45 minutes of continuous use |
| Dimensions: |
3.5" H x 10.0" W x 5.5" D |
| 88.9 mm x 254 mm x 139.7 mm |
| Weight: |
5 lbs. (2.27 kg) |
| Environment:; |
| Operating Temperature |
32°F to 131°F (0°C to 55°C) |
| Storage Temperature |
-40°F to 167°F (-40°C to 75°C) |
| Relative Humidity |
10-95% (storage) |
| (non condensing) |
15-95% (operating) |
| Auxiliary Serial Printer/Computer Output: |
RS232C serial output of data |
| Optional digital (remote alarm) interface cable |
| Catalog #FGI-3408 Printer provides data log (Interval) trends & waveform printouts |
| Safety Standards: |
EN60601-1, (IEC60601-1), UL544, CSA Std. C22.2 No.125-1984, EN 60601-1-2 |
| Catalog Numbers: |
FGI-3404-001 Oximetry/ECG/Respiration |
|
| FGI-3404-000 Oximetry Only Version |
| |
Go to ECG Specifications |
| SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE |
